Best HELLDIVERS™ 2 PC settings start with your hardware

Start with the PC requirements

The best HELLDIVERS™ 2 PC settings depend first on the machine running the game. Steam publishes minimum and recommended hardware requirements, but the listing does not provide an official graphics profile to copy. That distinction matters: a hardware threshold can indicate whether a PC meets the stated requirements, but it cannot promise a particular frame rate, image-quality preset, or control setup.

The published minimum includes Windows 10, 8 GB of RAM, a GTX 1050 Ti or Radeon RX 470, and 135 GB of storage. The recommended level raises the memory requirement to 16 GB and lists an RTX 2060 or a Radeon RX 6600XT. Steam also recommends an SSD.

Those details are the most reliable starting point available for a PC settings guide. They identify the components to check before changing options in the game, while leaving the actual balance between visual quality and fluidity to the individual system.

Check the five hardware points that matter

Before adjusting the menus, write down the configuration of the PC where HELLDIVERS™ 2 is installed. A short inventory makes the comparison more useful than a profile copied from another machine.

1. Note the installed Windows version.
2. Check the amount of installed RAM.
3. Identify the graphics card.
4. Check the available storage space.
5. Note whether the game is installed on an SSD.

Then compare each item with the official Steam listing represented by HELLDIVERS™ 2. The minimum level is a required hardware reference. The recommended level is a higher reference point for the system. Neither threshold guarantees a specific FPS count, and neither one supplies a universal graphics configuration.

This is also why the recommended level should be read carefully. Moving from the minimum to the recommended hardware does not automatically establish that every scene will remain equally smooth. The result can still vary with the resolution, the selected options, and the situation being displayed. Those variables need to be kept visible when judging a change.

Test one setting family at a time

Once the hardware has been checked, begin with a neutral profile and change only one option, or one closely related family of options, at a time. Record the original value before testing. This gives you a clear point of comparison and makes it possible to reverse a change that reduces readability or fluidity.

• Reproduce a comparable gameplay situation.
• Keep the same resolution during the comparison.
• Observe both fluidity and readability.
• Keep the change only if it produces a useful result.
• Revert the setting if the result varies too much to judge.

A comparable scene is essential. A quiet area and a busy sequence do not place the same demand on the system, so comparing them can make an adjustment appear better or worse than it really is. The same applies to changing several option families at once: if the result improves, you cannot tell which adjustment caused it.

Steam publishes no shared benchmark, FPS target, or frame-rate ceiling for this guide to use as a universal reference. An isolated frame-rate figure therefore cannot predict the experience on another PC unless the resolution, hardware, settings, and test situation are comparable. The safest conclusion is local: keep the value that improves the result on the machine being tested.

Display options have no universal value

The official listing confirms no values for resolution, graphics quality, scaling, or vertical synchronization. It also confirms no mouse sensitivity, dead-zone, or key-binding values. There is therefore no documented Steam configuration that can be presented as the correct answer for every player.

Adjust one value at a time in the menus available on your installation. Resolution and scaling can affect the relationship between image clarity and performance, while vertical synchronization changes how the output is presented. The available information does not establish a preferred value for any of them, so the guide can only recommend a controlled comparison rather than an invented preset.

The same principle applies to controls. A sensitivity value that feels precise on one setup may not feel precise on another, and the Steam requirements do not define a mouse or controller standard. Keep the setting that makes important elements easier to read and controls more reliable. A personal preference may be useful as a reference, but it does not become an official setting merely because it works for one configuration.

What the Steam references establish

This table separates published requirements from conclusions that the listing does not support. An SSD is a storage recommendation, not an FPS guarantee. RAM is part of the stated hardware reference, but the amount alone does not predict smoothness. Likewise, the graphics card names indicate the listed requirement levels without defining a fixed quality preset.

Older values, older presets, or recommendations found elsewhere should be labelled as dated references unless their source establishes that they still apply. They should not be described as official camera or graphics parameters when they come only from an old preset. In this case, Steam confirms the hardware levels above, while the values for resolution, quality, scaling, synchronization, sensitivity, dead zones, and key bindings remain unconfirmed by the listing.

Keep the comparison honest

Several common shortcuts make a PC settings recommendation sound more certain than the available information allows:

• Copying a profile without checking the hardware.
• Changing several families of options at the same time.
• Comparing a quiet area with a busy sequence.
• Promising an FPS increase without a comparable measurement.

Use the official Steam page when following the available information. The official Steam gallery also provides direct visuals. On jeu.vidéo, find the latest news, PC articles, and the esports section.

Professional or experienced players’ settings can serve as a reference when they are documented, but no configuration automatically suits every beginner. The useful question is not whether a value looks popular; it is whether the value improves clarity, control, or fluidity under the same conditions on the PC being tested.

À retenir

Frequently Asked Questions

For further tracking, consult the official Steam page and its official gallery assets. These references help separate the information Steam confirms from settings that still need to be judged on the individual PC.

Use the requirements as a starting line

The most defensible answer to the best HELLDIVERS™ 2 PC settings question begins with the machine itself. Steam identifies two hardware levels: a minimum reference with Windows 10, 8 GB of RAM, a GTX 1050 Ti or Radeon RX 470, and 135 GB of storage; and a recommended level with 16 GB of RAM, an RTX 2060 or Radeon RX 6600XT, plus an SSD recommendation.

Those figures are useful for checking compatibility. They are not a substitute for testing, and they do not establish how a particular resolution, graphics-quality level, scaling mode, or vertical-synchronization option will behave. The Steam listing also provides no official mouse sensitivity, dead-zone, or key-binding values.

Start from a neutral profile, note the original settings, and reproduce the same type of scene for every comparison. Keep the resolution constant, observe fluidity and readability, and keep only a change that produces a clear benefit on the hardware being tested.

Make each result possible to read

A settings test is only useful when its conditions are visible. The Steam listing gives no shared benchmark, FPS target, or frame-rate ceiling. A number reported without identical resolution, hardware, and scene conditions therefore says little about another PC.

This limitation does not make testing pointless. It defines the right scale for the conclusion. A local comparison can show which option works better on one installation. It cannot turn that observation into a universal preset. Treat settings from another system as a reference, including professional settings, and verify them rather than presenting them as automatically suitable for every beginner.

Do not mistake a reference for a guarantee

The minimum and recommended requirements, the SSD recommendation, and the Windows PC platform are the confirmed reference points. Guaranteed FPS, consistent performance, an optimal graphics profile, and a PlayStation or Xbox settings table are not supplied by the Steam listing.

That distinction is especially important when older values or presets circulate online. They can be useful historical references, but they should be identified as such. They should not be called official camera or graphics parameters when they come only from an old preset.

Finish with a controlled check

Do not copy a profile without comparing the hardware. Do not change several option families at the same time. Do not compare a quiet area with a busy sequence, and do not promise an FPS increase without identical conditions.

The official Steam gallery serves as a visual reference. To continue reading, visit the jeu.vidéo sections for news, articles, and esports.

The practical conclusion is deliberately narrower than a preset: check the PC against Steam’s requirements, then test one change at a time in a comparable situation. That approach gives the result the best chance of reflecting the installation that will actually run the game.

To keep following the topic, also read official Steam page and official gallery assets.

For related coverage, consult our article on Hades II on PC: the best settings for smoother combat and our article on Fishbait: check your PC before looking for the right settings.