The best THE FINALS settings should keep the image stable, make targets easier to spot and keep your aim repeatable. The game moves fast. Buildings collapse during fights. A beautiful preset can still lose a Cashout defense.
Key points
- THE FINALS is free-to-play on Steam, PlayStation 5, Xbox Series X|S and GeForce Now according to the official site.
- The official Steam page confirms a PvP FPS with destructible arenas, cross-platform multiplayer and a December 7, 2023 release.
- Official 9.9.0 patch notes mention performance improvements, reduced hitches, shader fixes and multiple audio corrections.
- Some frame generation settings may require a restart after being enabled according to official patch notes.
This baseline is for PC, PlayStation 5 and Xbox Series X|S players. Change settings in this order: performance, visibility, audio, then input. That makes every adjustment easier to judge.
THE FINALS best settings at a glance
- Target stable FPS first: 60 FPS on console, 120 FPS or higher on PC if your display supports it.
- Lower shadows, effects, post-processing and reflections before crushing resolution.
- Turn motion blur off for cleaner slides, jumps and destruction.
- Keep sound effects above music.
- On controller, settle deadzone and sensitivity before changing aim assist.
- Test for ten minutes, then change only one option at a time.
THE FINALS best settings: quick answer
Use a performance-first profile, a clear image and an information-focused audio mix. On PC, use fullscreen when available. Keep V-Sync off for lower latency. Enable DLSS, FSR or XeSS only if enemy outlines stay sharp.
On console, favor performance mode when available. Put your TV in game mode. Do not push HDR or brightness until bright areas hide targets.
For aiming, avoid extreme sensitivity. THE FINALS asks you to track vertical movement, correct after jumps and fight inside broken buildings. Medium sensitivity, slower ADS and a low but stable deadzone are easier to trust.
The game is free-to-play on Steam, PlayStation 5, Xbox Series X|S and GeForce Now according to the official site. You will meet mouse, controller and cloud players. For more competitive help, check jeu.video esport, practical articles and latest news.
Recommended THE FINALS settings for FPS
Open the options menu before a serious session. Graphics should help you read the fight, not just decorate the arena. Official patch notes mention performance fixes, shader stutter, frame hitches and audio changes. Recheck your setup after major updates.
| Setting | Baseline | Reason |
|---|---|---|
| Display mode | Fullscreen on PC | May help focus and latency. |
| FPS cap | Near your stable refresh target | A steady cap beats spikes followed by drops. |
| Motion blur | Off | Movement stays easier to read. |
| Shadows | Low to medium | Good FPS gain with limited competitive cost. |
| Effects and post-processing | Low to medium | Less visual noise during explosions. |
| Upscaling | Quality or balanced | Enemy silhouettes must stay clear. |
| V-Sync | Off for competitive PvP | Input feels more direct. |
On weaker PCs, lower effects, shadows and reflections first. Try upscaling after that. If outlines become soft, raise upscaling quality and cut another heavy setting instead.
THE FINALS best settings by platform
Your display, input device and network matter most. A 60 Hz TV, a 144 Hz monitor and GeForce Now need different priorities.
| Platform | Priority | Check first | Common mistake |
|---|---|---|---|
| Low-end PC | Stable FPS | Shadows, effects, upscaling quality | Lowering resolution until targets are hard to read. |
| 120/144 Hz PC | Low latency | FPS cap, V-Sync off, correct refresh rate | Leaving Windows at 60 Hz. |
| PS5 | Performance and clarity | TV game mode, readable HDR | Using TV processing that adds delay. |
| Xbox Series X|S | Consistent input | Low latency mode and controller firmware | Changing sensitivity and deadzone together. |
| GeForce Now | Stable connection | Bitrate, latency and stream resolution | Blaming aim settings for network delay. |
On TV, enable game mode. On a gaming laptop, plug in the charger. Force the dedicated GPU if needed, then make sure the game is not running in battery saver mode.
THE FINALS audio settings for cleaner pushes
Audio often warns you before the image does. Slides, gadgets, Cashout steals and collapsing walls can decide a fight. Official 9.9.0 notes mention several audio fixes, including footsteps, melee sounds and gadget sounds.
- Lower music until it never covers footsteps.
- Keep sound effects above commentator volume for competitive play.
- Test your headset near stairs, rubble and objectives.
- Avoid artificial surround if direction becomes vague.
- Lower voice chat if teammates hide Cashout steal cues.
Mouse and controller input mistakes to avoid
The best input setup is the one you can repeat under pressure. On mouse, choose a sensitivity that allows a clean 180 without lifting your hand repeatedly. Tune ADS after that for jumping targets and broken sightlines.
On controller, lower deadzone until drift appears, then move one step back. Tune horizontal sensitivity before vertical sensitivity. Do not change aim assist, deadzone and ADS in the same match.
Do not change sensitivity after every bad match. Write down the problem: too slow against Light players, too fast in ADS or shaky after slides. Adjust one value, play two matches, then decide.
Testing method for THE FINALS settings
A setting that feels good in empty space can fail when destruction starts. Test near real objectives with vertical movement, explosions and busy audio. Steam describes THE FINALS as a physics-driven FPS with destructible arenas, so your test needs that pressure.
- Repeat the same route in practice or a match situation.
- Check one bright area, one dark area and one cluttered interior.
- Slide, jump, turn quickly and ADS on a target.
- Trigger or watch destruction, then look for FPS drops.
- Listen for footsteps and objective cues without staring at the source.
- Change one option only, repeat the sequence and compare.
If you gain FPS but lose enemies in the picture, the trade is bad. If the game looks sharp but input feels heavy, it is bad for PvP. The right setup lets you spot earlier, correct faster and panic less.
Track THE FINALS performance updates
Settings can change value after patches, drivers and seasons. Use the official patch notes, the Steam page and Embark’s official channel list for reliable updates.
Frequently Asked Questions
Which THE FINALS settings should I change first?Start with motion blur off, lower shadows and effects, a stable FPS cap, high sound effects and a medium sensitivity.
Lower shadows, effects, reflections and post-processing first. Use DLSS, FSR or XeSS in quality mode only if silhouettes stay clear.
Pick performance. A stable image helps more than high settings that drop frames during explosions and destruction.
Lower deadzone until drift appears, then raise it one step. Tune ADS only after that baseline feels stable.
Destruction can stress CPU, GPU, shaders and streaming. Lower effects, use a realistic FPS cap and restart after heavy graphics changes.
Yes if your TV stays in game mode and keeps bright detail visible. If targets disappear in highlights, reduce HDR or use SDR.
Use two full matches or ten minutes on the same route. Short tests can be distorted by one lucky or unlucky fight.
Use the official patch notes, the Steam page and Embark’s official channel list.
Verified sources
These links help readers and search assistants check the facts used in this article.
